Price: $59.99
(as of Jun 04, 2024 03:44:40 UTC – Details)
Product Description
YBJ Wireless Alarm System for Home Security, DIY Burglar Alarm 20 Pieces Kit with GSM and WiFi APP Control for Home & Shop
WIFI and GSM dual network, Double reliability
Please note:
The alarm system only work with 2.4G wifi, not work with 5G Wifi.
Please make sure your wifi work at 2.4GHz mode when the host is connected to your phone.
After it, you can re-connect 5G wifi on your phone.
The alarm system will keep connect to 2.4G wifi all the time.
Work with “Smart Life” and “Tuya” APP.Compatible with amazon Alexa and Google Assistant.9 languages can be switched freely according to your needs.Support SMS/APP/CALL notification.Support timing arm and disarm to avoid repeated operation or missed arm/disarm.Up to preset 5 groups alarm phone numbers and SMS.
Door and window sensor
The door/window sensor is installed on the movable door/window. First, wipe the corresponding position of the door/window clean, take out the wireless door/window sensor and stick double-sided tape on the bottom.
The installation of door/window sensor should pay attention to the following points:
1, the transmitter and sensor should be installed separately (The bigger one is transmitter and the smaller one is sensor). The transmitter should be installed on a fixed door frame, while the sensor installed on a movable door/window. (The position of one side of the transmitter indicator light should correspond to the sensor).
2、The sensor should be aligned up and down with the transmitter, and the distance between them should not exceed 1CM.
3、After installation, the indicator light flashes for one second at the moment of opening the door/window, indicating that the installation is complete.
4. The indicator light of the door/window sensor flashes for one second to indicate an alarm prompt, and the indicator light stays on for a long time to indicate a low battery warning.
5. The transmitter and the sensor can also be reinforced with screws (remove the bottom cover of transmitter, reinforce the screws on the bottom cover, and then fasten the surface cover onto the bottom cover, while the sensor can be directly reinforced with screws). Or the transmitter and sensor are respectively glued to the door and door frame with double-sided adhesive.
2.4inch TFT colorful screen
Wide application
Easy to install
When the host dials a phone number and it is busy, it will dial the next reserved number without missing every alarm notification.
Please note:
The camera is not included, you need to buy it separately.
Input voltage DC5V (micro USB jack) Working current <200mA Siren output <500mA Wireless frequency 433Mhz Wireless coding eV1527 GSM standard 850/900/1800/1900Mhz WiFi standard IEEE802.11b/g/n wireless standard Back up battery 3.7V/1000mAh lithium battery Working temperature -10℃~55℃ Relative humidity <93%RH (No freezing) Product dimension 185x125x14.7mm
GSM+WiFi: Connect WiFi easy, No any monthly fee. Free mobile app for iPhone and Android phones so you can control your alarm system from anywhere with your smartphone. Built-in GSM module, support GSM sim card.
DIY Home Security System: Easy To Install panel with wireless sensors that can be integrated in short time with automated fast response alarms. Support up to 100 learing/storage/location for remote control, RFID cards and wireless detector as you need; You can control this gsm alarm system Arm/Disarm/Voice Monitoring /Intercom by cellphone anywhere.
Protect Your House: When someone trigger this system that will be loud alarm to scare thief away and also will make a phone or sending a message to someone which you save the phone.
Works with Alexa: Use voice to control your alarm system and intelligent household devices. Works with Google, Amazon Alexa as well. Your smartphone download APP, then the panel connect WiFi, connect Alexa via APP, only works on 2.4GHz WiFi networks.
Personalize your home security – Customize your wireless house alarm system in the APP, how your sensors protect your home, and choose your favorite accessory mode for your alarm
Reviews
There are no reviews yet.